| Paper | Title | Other Keywords | Page |
|---|---|---|---|
| TU1B4 | Minimizing the Fluctuation of Resonance Driving Terms for Analyzing and Optimizing the Storage Ring Dynamic Aperture | lattice, sextupole, betatron, resonance | 66 |
|
|||
| Minimization of resonance driving terms (RDTs) of nonlinear magnets such as sextupoles and octupoles is an essential condition for enlarging the dynamic aperture (DA) of a storage ring. We recently studied the correlation between minimizing the fluctuation or variation of RDTs along the ring and enlarging the DA. It was found that minimizing the RDT fluctuations is much more effective than minimizing the commonly-used one-turn RDTs in enlarging the DA, and that reducing low-order RDT fluctuations can also help reduce both higher-order RDT fluctuations and higher-order one-turn RDTs. In this paper, DA analysis based on minimizing RDT fluctuations is further extended. By considering the RDT fluctuations including low- and high-frequency fluctuations, some nonlinear dynamics issues can be explained. DA optimization is also studied based on numerically minimizing RDT fluctuations using genetic algorithms. Large DA can be obtained, and the optimization is performed very fast. | |||
|
|
Slides TU1B4 [3.118 MB] | ||
| DOI • | reference for this paper ※ doi:10.18429/JACoW-FLS2023-TU1B4 | ||
| About • | Received ※ 23 August 2023 — Revised ※ 28 August 2023 — Accepted ※ 30 August 2023 — Issued ※ 02 December 2023 | ||
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
| WE4P31 | Deterministic Approach to the Lattice Design of BESSY III | lattice, sextupole, emittance, quadrupole | 203 |
|
|||
|
Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of Helmholtz Association Since 2021 HZB pursues the design of a 2.5 GeV storage ring as a successor of BESSY II in Berlin. The user’s demand for diffraction-limited radiation at 1 keV corresponds to an emittance of 100 pm, making an MBA lattice indispensable. The envisaged location limits the circumference to ~350 m. MBA lattices are composed of smaller substructures that can be analyzed and optimized separately, before combining them into one super period. The prerequisite for this approach is a clear idea of the goal parameters and their prioritization, as the design process is dominated by permanent decisions between different options. The resulting generic baseline lattice for BESSY III is a simple structure with few non-linear elements, already fulfilling all goal parameters and showing a very compatible nonlinear behavior. This is our starting point for further optimizations including swarm or MOGA approaches. |
|||
| DOI • | reference for this paper ※ doi:10.18429/JACoW-FLS2023-WE4P31 | ||
| About • | Received ※ 30 August 2023 — Revised ※ 30 August 2023 — Accepted ※ 01 September 2023 — Issued ※ 02 December 2023 | ||
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||